Bidalot cylinder RF80WR 80cc Minarelli AM6 stroke 44,9mm crank 90mm

Bidalot RF80WR 80ccc.44,9 crank 90mm for Minarelli AM6.

Cylinder modified by defining new transfer and exhaust cores, adapted to its 80cc displacement.
These cores have been studied to provide a very high performance at high revs, without penalizing, torque and power at medium revs.

The water ducts, surrounding the charge transfer and exhaust, have been improved with constant thicknesses to guarantee stability and to obtain an optimized cooling.

This cylinder is designed to be equipped with the crankshaft ref.12100866 44.9 mm crankshaft, 90 mm connecting rod.

The exhaust nipple included in the kit with the factory Racing exhausts is a 4-bolt nipple, however, it is possible to fit a 2-bolt nipple , with a bolt spacing of 50 mm.

Features

• Distribution heights and compression ratios suitable for racing use (±193° exhaust, ±132° transfers, for a volumetric ratio of 15.8-16.0/1)
• Requires fitting of all Racing components to get the most out of it, 80/90cc exhaust, 28 / 32mm carburettor intake, Reed Valve VForce3 reed box and Bidalot WR rotor.
• The extreme degree of performance also requires excellent mechanical knowledge for tuning and maintenance.

The kit includes

• Nikasil coated aluminium cylinder d=47,6mm
• Self-centring monobloc cylinder head, 2.4mm recessed in the cylinder, with high-compression combustion chamber
• 6 Transfers
• Reinforced exhaust
• Combined with 44.9mm stroke crankshaft, exact displacement is 79.93 cm3
• Hypersilicon Racing Factory piston
• Base gasket set in different thicknesses
• New 2018 profile, elliptical, specific, to reduce running clearances
• Segment Chrome-plated steel Ø47,6x1, domed lapped, Japanese manufacture
• Shaft Ø12x40mm
• Set of cylinder head O-rings
• 4 cylinder studs L=120mm
• Various screws

Mounting instructions