Kit Carburetor PB28 V2 with Filter d=48mm VOCA Racing and Carburetor Nozzle d=35 Pitbike

Kit for Pitbike consisting of Carburetor VOCA PB28 V2 with Air filter  d=48mm VOCA Racing and Carburetor nozzle d=35 Pitbike.

.

CARBURBURNER 28 VOCA RACING PB V2 ROUND BELL PITBIKE 4T

Round bell carburetors from the manufacturer Voca Racing, designed to be mounted on Pitbikes 150/160cc 4T, and equipped with a manual starter.

Voca Racing.

VOCA Racing has worked with its racing team to ensure that the gums it mounts are the ones that work best, right out of the box, with a stock Pitbike engine. To get a good base. From here you can adjust them more or less to your liking. But you won't be too far from what your bike needs.

As low-end gears you can mount the Keihin VCR-RD13.JET.PWKL.

VCR-RD13.JET.PWKL.

High 5mm gears in 28mm A-VCR-RD13.JET.D5

.

Sizes:

• Ø Outer connection with nozzle = 34mm.
• Ø Outer connection with air filter = 48mm.

AIR FILTER D=48MM KEIHIN/PWK VOCA RACING

Air filter with double layer of foam. Each layer has different porosity. Being a larger pore on the outside of the filter to increase air flow, and the inner foam with a smaller pore to improve filtering. Designed for maximum performance on large carburetors such as the Keihin PWK or VOCA PB.

Carburetor connection for the PWK or VOCA PB.

Connection for carburetors of D.48mm.

Shipping includes one straight fitting and one curved fitting.

Shipping includes one straight fitting and one curved fitting.

Shipping includes one straight fitting and one curved fitting.

Approximate sponge sizes:

.

• Diameter of the sponge: 80mm
• Length of the sponge: 60mm

RUBBER CARBURER NOZZLE Ø35 MOTOR PITBIKE

Original type nozzle for YX and Z engines to mount with original engine nozzles and with Keihin, VOCA, Oko, Motorforce…PWK type carburetors.

Inner diameter of the nozzle 34mm.

Measurements of the fixing holes M6 and 48mm between centers.

M6 fixing holes M6 and 48mm between centers.

M6 fixing holes M6 and 48mm between centers.