{"product_id":"cigue-al-47mm-carrera-100mm-biela-stage6-r-t-100fl-para-malossi-c-one-rc-one","title":"Crankshaft Stage6 R\/T 100FL for C-One \/ RC-One Malossi crankcase c.47mm connecting rod 100mm","description":"\u003cp\u003eCrankshaft \u003cstrong\u003eStage6 R\/T 100FL\u003c\/strong\u003e \u003cstrong\u003eStroke 47mm, Connecting rod 100mm\u003c\/strong\u003e for \u003cstrong\u003eMalossi C-One and RC-One\u003c\/strong\u003e crankcase.\u003c\/p\u003e\n\u003cp\u003eCrankshaft designed exclusively for the \u003cstrong\u003eCylinder Stage6 R\/T 100cc FLR\u003c\/strong\u003e to make the most of its maximum power.\u003c\/p\u003e\n\u003cp\u003eUnlike conventional crankshafts, the \u003cstrong\u003elower pin\u003c\/strong\u003e of the \u003cstrong\u003eStage6 R\/T\u003c\/strong\u003e crankshaft is \u003cstrong\u003e20 mm\u003c\/strong\u003e. The lower bearing of the connecting rod was correspondingly chosen to be larger. This results in the cheek pressure being much \u003cstrong\u003estiffer\u003c\/strong\u003e and the entire \u003cstrong\u003ecrankshaft is much more durable\u003c\/strong\u003e at maximum power above \u003cstrong\u003e40hp\u003c\/strong\u003e and especially in circuit use.\u003c\/p\u003e\n\u003cp\u003eOf course, special attention was also paid to the \u003cstrong\u003edesign and balancing\u003c\/strong\u003e of the crankshaft, especially for use with the \u003cstrong\u003eRT100cc cylinder\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-end\u003c\/strong\u003e balancing using six high-density tungsten inserts (17.6 g\/cm3) and \u003cstrong\u003eultralight connecting rod\u003c\/strong\u003e (less than 80 g).\u003c\/li\u003e\n\u003cli\u003eNotable \u003cstrong\u003eincrease in power\u003c\/strong\u003e both in the \u003cstrong\u003elow and high rpm range.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAll \u003cstrong\u003eStage6 R\/T\u003c\/strong\u003e crankshafts are checked for runout within a maximum of 0.02 mm to \u003cstrong\u003eminimize vibrations as much as possible.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot-forged\u003c\/strong\u003e shafts made of case-hardened steel 18 Ni Cr Mo5.\u003c\/li\u003e\n\u003cli\u003eThread rolling by cold forming (not cutting) for \u003cstrong\u003egreater durability\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eHeat treatments with controlled HRC (hardness) on shafts.\u003c\/li\u003e\n\u003cli\u003eDouble hardening cycle for the connecting rod, also with controlled hardness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined connecting rod\u003c\/strong\u003e with final quality check.\u003c\/li\u003e\n\u003cli\u003ePerfect surface finish by grinding and lapping for \u003cstrong\u003egreater reliability\u003c\/strong\u003e with 100% dimensional stability.\u003c\/li\u003e\n\u003cli\u003e Connecting rod small end bearing \u003cstrong\u003eHQ\u003c\/strong\u003e \u003cstrong\u003esilver\u003c\/strong\u003e, designed for high speeds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnecting rod 20mm x 41mm.\u003c\/li\u003e\n\u003cli\u003e Stroke 47 mm.\u003c\/li\u003e\n\u003cli\u003e Connecting rod 100 mm (piston pin from 12 to 14 mm depending on the bearing)\u003c\/li\u003e\n\u003cli\u003e Connecting rod diameter: 79 mm.\u003c\/li\u003e\n\u003cli\u003e Weight: 1.8kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAttention: All crankshafts are coated with a thick layer of oil for protection. They must be thoroughly cleaned with fuel before assembly.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAttention!\u003c\/strong\u003e Balancing checks \u003cstrong\u003emust\u003c\/strong\u003e be carried out \u003cstrong\u003ebefore\u003c\/strong\u003e installing in the engine, since manufacturers deny \u003cstrong\u003ewarranty\u003c\/strong\u003e for any balancing fault found after assembly.\u003c\/p\u003e","brand":"Stage6 RT","offers":[{"title":"Default Title","offer_id":54306607563137,"sku":"S6-7916699","price":431.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6223\/5959\/files\/s6-7916699_1.png?v=1750277614","url":"https:\/\/motoscoot.net\/en\/products\/crankshaft-47mm-stroke-100mm-rod-stage6-r-t-100fl-for-malossi-c-one-rc-one","provider":"Motoscoot","version":"1.0","type":"link"}