Description
Carter smallframe C1 Vespa Quattrini.
Carter smallframe C1 Vespa Quattrini.
Carter for Vespa Smallframe, íntegramente produced in Italy. Carter for Vespa Smallframe, íntegramente produced in Italy.
Reinforced in specific points, cast in Galsi9 aluminium, it is assembled with 13 allen screws threaded in the same housing of métrico 6. Carter for Vespa Smallframe, made entirely in Italy. Specially designed for Vespa Smallframe.
Fitted to house a mine box in the same crankcase The frame arm is made to accommodate a lacute;mine box (sold separately).
The frame arm is much stronger than the Piaggio, it allows the mounting of 3.50x10 tires. The frame arm is much stronger than the Piaggio, it allows the mounting of 3.50x10 tires. The frame arm is much stronger than the Piaggio.
It has a housing for mounting a mechanical water pump, which is driven by a nylon pinion that engages the primary. It has a housing for mounting a mechanical water pump, which is driven by a nylon pin that engages the primary. It has a housing for mounting a mechanical water pump, which is driven by a nylon pin that engages the primary.
The flatness of the cylinder allows you to assemble cylinders with wide transfers without having to weld.
Cylinder housing ready to mount 86mm spade, bearings 6304/c4 and seals 20-35-7mm.
It is possible to mount original spare parts such as wheel axle, derailleur, primary, clutch, developments etc. .
Additional Information
| SKU: | C-1 |
| Homologation: | No |
| Product Type: | Crankcase |
Product Questions
Good for
| Make | Model |
|---|---|
| Make | Model |