VOCA Cylinder Bestia 80cc Derbi Euro 3/4 d.50mm - black Cylinder Head

Cylinder VOCA Bestia 80cc Derbi euro 3 Ø50mm

You were asking for it and Voca has made it happen! The new Voca Bestia cylinder comes to crown your carefully built setup!

Get ready to transform your riding experience with the 80cc Voca Bestia cylinder. This cylinder has been studied in detail and designed to take your motorcycle to a completely new level.

With its increased 80cc displacement, it gives you that extra power and additional thrust you were looking for. Imagine the roar of the engine and the feeling of greater power under your control, Voca has wanted to raise the Racing level to a higher range! Every detail of this kit has been refined to the millimeter.

Get ready to feel the difference and experience the thrill to the fullest!

For a cylinder with these characteristics, with its high performance and the high output achieved, we recommend following the detailed instructions below:

• Check that the air filter is clean. It is important that the carburetor always has the air filter installed; for this, the Voca carburetor with manifold and filter will be of great help B-RD13FT.28.FILT480012104
• Install only the cylinder, piston, Piston rings, and gaskets included in the kit.
• When using the cylinder head gasket included with the cylinder, it must be lubricated with oil or grease before installation
• Use a 3% oil mixture. Always use high-end oil (Voca Speedfeed, Motul 800, Castrol A747...)
• We recommend the use of 98-octane gasoline.
• 115mm studs are required for installation AP15SP15.192

We are talking about an aluminum cylinder with a nickel, carbide, and silicon coating, which gives you a significant advantage in:

• Greater durability and wear resistance: The cylinder can better withstand the high pressures and friction generated during engine operation, extending its service life. 

• Better heat dissipation: We all know that aluminum, apart from its low weight, has incredible thermal conductivity, ensuring optimal performance and prevention of overheating!  

• Less friction: This results in smoother engine operation and improved efficiency.  

• Compatibility with modern lubricants: Good oil improves engine performance, that is a fact. But using a better oil such as Voca, Castrol, Motul... on this type of coating will make your maintenance and performance superior  

• Improved engine performance: Improving throttle response and greater combustion efficiency give you a slight increase in power.

Technical characteristics:

• Diameter: Ø50
• Stroke: 39.3 mm
• Port layout: 7 Transfers
• Displacement: 78.5 cc
• Squish: 0,8 mm
• Cylinder Head: Black

The kit includes:

• Cylinder made of aluminum with nickel and silicon carbide coating
• Piston complete anodized Tech piston (VCR-RD1188.80.PI/ A/B/C + VCR-RD1188.80.ROD + VCR-RD1188.80.CLP)
• Piston rings: 1 chrome-plated nodular 50 x 1 mm (VCR-RD1188.80.SEG)
• Gasket set (VCR-RD1188.80.GAS)
• Hardware
• Exhaust nozzle 32x45x28

Valid for:

• Derbi Euro3 engines