KRM titanium exhaust scarf Derbi 96-100cc and 100cc FL

Titanium exhaust pipe scarf KRM Derbi 96-100cc and 100cc FL.

The titanium belly of the exhaust KRM Pro Ride is a product of the highest range in terms of high-performance and output exhausts.

It is intended for exclusive competition use, allowing you to extract the maximum power from the Derbi engine.

This is an exhaust designed for cylinders from 90 to 100 cc or 100cc FL, compatible with racing cylinders 2Fast, Bidalot, Malossi, Polini and other racing cylinders.

Manufactured entirely in titanium by hand, with a significant weight reduction, improved performance and a unique finish.

Its venturi system called Stinger creates a narrowing, increasing the pressure and acceleration of the gas flow. Interchangeable for better adjustment.

Comes with instructions for optimal assembly and installation on the motorcycle.

For proper maintenance, it is recommended to clean without applying any anti-corrosive treatment, as it does not turn black.

COMPONENTS:

• 1x KRM titanium exhaust body
• 1x Machined nozzle Ø38 mm
• 2x Exhaust springs in stainless steel
• 1x KRM Multiflex neochrome mounting collar
• 1x Removable silencer elbow
• 1x Venturi
• 2x Anti-mark protective gloves
• KRM Pro Ride Sticker Set

ASSEMBLY:

• Use the supplied gloves for the installation of the exhaust.
• Mount the exhaust nozzle.
• Place the exhaust on the nozzle.
• Install the exhaust springs.
• Fit the multifix fixing clamp.
• Position and tighten the exhaust elbow.

Note: do not create tension during assembly, to avoid breakage.

WARRANTY CRITERIA:

• Product use below the maximum service life of the container, estimated at 30 hours (calculation based on an average speed of 70 km/h).
• No shaking in the exhaust pipe.
• Do not use or store in a humid environment.
• Assembly and use according to our recommendations.
• Compliance with maintenance conditions.

Important: NOT Approved (competition use only).