20° 3/8x24 M10 Banjo Goodridge

Goodridge 20° curved 10 mm AN3 black banjo fitting for brake hose

The Goodridge banjo fitting is a hydraulic connector designed for motorcycle brake and clutch systems. Its design with a 20° angle makes it possible to slightly modify the orientation of the hose relative to the connection point, making installation easier and improving hose routing in setups where interference with other components must be avoided.

It features a connection for hoses with an AN3 (-03) end, with a 3/8\" x 24 UNF thread, and a seat for a 10 mm (3/8\") banjo bolt. This configuration allows it to be integrated into different hydraulic systems using compatible connections.

Its black finish provides a discreet, sporty look, while its metal construction is designed to withstand the demands of hydraulic brake installations. It is a suitable solution for making custom hoses, replacing connections, or adapting the routing of an existing installation.

Main features

• Goodridge banjo-type fitting with a 20° angle.
• Manufacturer reference: 593-03DBK.
• Connection for AN3 (-03) hose.
• AN3 connection thread: 3/8\" x 24 UNF.
• Hole for 10 mm (3/8\") banjo bolt.
• Metal construction with black finish.
• 20° angled design to facilitate hose routing.
• Suitable for compatible hydraulic brake and clutch installations.

Application and installation

This fitting is intended for custom hydraulic hose installations, especially when a slightly angled connection is needed to improve hose orientation. It can be used on brake master cylinders, calipers, and other components that accept this type of connection.

Important

Before placing the order, check that the hose uses an AN3 connection and that the component where it is installed accepts a 10 mm banjo bolt. Also check that the 20° angle allows the required routing without tension or interference.