1 of 13
VOCA Racing Vendor:

VOCA Cylinder Bestia 80cc Derbi Euro 3/4 d.50mm - red Cylinder Head

VOCA Cylinder Bestia 80cc Derbi Euro 3/4 d.50mm - red Cylinder Head

Regular price 279,00€
Sale price 279,00€ Regular price 313,39€ -11%

SKU: VCR-RD1193.80.CYL/RE

Available
<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>
  • Receive it in 24-48 hours
  • Free shipping on orders over €119

Description

Cylinder VOCA Bestia 80cc Derbi euro 3 Ø50mm

You were asking for it, and Voca has made it happen! The new Voca Bestia cylinder is here to crown your carefully built setup!

Get ready to transform your riding experience with the 80cc Voca Bestia cylinder. This cylinder has been studied in detail and designed to take your motorcycle to a completely new level.

With its increased 80cc displacement, it gives you that extra power and additional pull you have been looking for. Imagine the roar of the engine and the feeling of greater power under your control; Voca has aimed to raise the Racing level to a higher range! Every detail of this kit has been refined to the millimeter.

Get ready to feel the difference and experience maximum excitement!

For a cylinder with these features, given its high performance and the high output it delivers, we recommend following the detailed instructions below:

  • Check that the air filter is clean. It is important that the carburetor always has the air filter installed; for this, the Voca carburetor with manifold and filter will be of great help B-RD13FT.28.FILT480012104
  • Install only the cylinder, piston, piston rings, and gaskets included in the kit.
  • When using the cylinder head gasket included with the cylinder, it must be lubricated with oil or grease before installation
  • Use a 3% oil mixture. Always use high-end oil (Voca Speedfeed, Motul 800, Castrol A747...)
  • We recommend using 98-octane gasoline.
  • 115mm studs are required for installation AP15SP15.192

We are talking about an aluminum cylinder with a nickel, carbide, and silicon coating, which gives you a significant advantage in:

  • Greater durability and wear resistance: The cylinder can better withstand the high pressures and friction generated during engine operation, extending its service life. 
  • Better heat dissipation: We all know that aluminum, in addition to its low weight, has incredible thermal conductivity, ensuring optimal performance and prevention of overheating!  
  • Lower friction: This results in smoother engine operation and improved efficiency.  
  • Compatibility with modern lubricants: Good oil improves engine performance, that is a fact. But using a better oil such as Voca, Castrol, Motul... with this type of coating will make your maintenance and performance superior  
  • Improved engine performance: Better throttle response and greater combustion efficiency give you a slight increase in power.

 

Technical features:

  • Diameter: Ø50
  • Stroke: 39.3 mm
  • Porting: 7 transfers
  • Displacement: 78.5 cc
  • Squish: 0,8 mm
  • Cylinder Head: Red

 

The kit includes:

  • Cylinder made of aluminum with a nickel, silicon carbide coating
  • Piston Tech complete anodized (VCR-RD1188.80.PI/ A/B/C + VCR-RD1188.80.ROD + VCR-RD1188.80.CLP)
  • Piston rings: 1 chrome-plated nodular 50 x 1 mm (VCR-RD1188.80.SEG)
  • Gasket set (VCR-RD1188.80.GAS)
  • Hardware
  • Exhaust flange 32x45x28

 

Valid for:

  • Derbi Euro3 engines

See the Spare parts for this product

Cilindro VOCA Bestia 80cc Derbi Euro 3/4 d.50mm - Culata roja VCR-RD1193.80.CYL/RE

VOCA Cylinder Bestia 80cc Derbi Euro 3/4 d.50mm - red Cylinder Head

279,00€