Complete conical Front sprocket bell 69 Crimaz

Complete conical Front sprocket 69 bell Crimaz.

Attention: only compatible with straight-tooth bells.

Innovative Crimaz conical front sprocket system for the crankshaft, thus eliminating the need to install the key.

Ideal for tuned engines, and it is even the perfect solution when the crankshaft's keyway is in poor condition.

We recommend tightening the nut with a torque wrench to the torque specified by the manufacturer of 70NM (7kg), and for extra security, apply threadlocker to the nut.

Assembly: fit the cone onto the crankshaft, place the front sprocket, apply threadlocker to the thread and fit the washer and nut, lock the front sprocket with the one on the

bell using a tool to tighten it to 70NM (7Kg). If you do not have the tool, a 5 cent coin will suffice.

Disassembly: position the puller on the front sprocket, screw in the three bolts, once assembled tighten the central bolt which presses on the crankshaft until

it comes loose.

Front sprockets available with straight teeth.

-Bell 72, z22, z23, z24, z25, z26

-Bell 69, z25, z26, z27, z28