Sport / Fly / Delta Clutch Malossi clutch springs

Malossi brings us a great variety of springs to adjust our clutch.

These springs are responsible for holding the clutch; by installing stiffer springs, the engine needs more revolutions to gain more centrifugal force so that the clutch opens. The stiffer the springs, the higher the revolutions need to be. This makes the engine run at higher revs, and when the clutch engages, you will have more acceleration on the bike! The engine must always run at high revolutions for the clutch to stay engaged, because since the springs are very stiff, they want to return to their original position.

The Malossi springs are made of steel with silicon alloy with high carbon content, heat treated better withstands high temperatures, and does not lose properties at high temperatures nor with use, differentiating their hardness by color.

For MALOSSI FLY and DELTA clutch

Spring hardness

• White: 4000 - 6000 rpm
• Green: 5000 - 7000 rpm
• Yellow: 6000 - 8000 rpm

Attention: Watch your choice, as if it is too hard, you need more power and more RPM and with that, greater clutch wear.

Assembly instructions.

Compatible with the following clutches:

• MORINI / MINARELLI 100 MALOSSI DELTA CLUTCH 112MM
• MALOSSI DELTA CLUTCH PIAGGIO 50 PEUGEOT START 3/5
• MALOSSI FLY CLUTCH PIAGGIO GILERA HONDA PEUGEOT START 3/5 D=107
• MALOSSI FLY CLUTCH MORINI MINARELLI 100CC
• MALOSSI FLY CLUTCH MINARELLI D=107MM
• MINARELLI HORIZONTAL CLUTCH MALOSSI DELTA CLUTCH D=107MM