Malossi Force Master 2.1 electronic control unit Piaggio Liberty IGet 125 euro 5+

Control unit electronic Malossi Force Master 2.1 for Piaggio Liberty IGet 125 euro 5+.

For iGet Euro 5+ engines that suffer from flat power delivery and premature ignition cut-off due to strict emission regulations, the Malossi Force Master 2.1 control unit is the component responsible for unlocking the true potential of the engine block. By installing this ECU, we remove the factory restrictions that prevent the engine from revving higher, allowing for optimal cylinder filling throughout the entire rev range.

This 2.1 version improves performance management through an interface compatible with K and CAN communication lines, ensuring precise real-time reading of engine parameters. The main technical advantage is the shifting of the rev limiter up to 10,500 RPM, allowing the bike to increase RPM with steady progression where it previously just stopped. Additionally, it allows fine adjustment of the fuel mixture (injection) by ± 14% at low, medium, and high revs, achieving a perfect stoichiometric mixture even after installing racing components.

The Force Master 2.1 includes 4 preconfigured power curves to precisely adapt to your specific setup:

• Curve 0: Specific for 125cc with original exhaust, Malossi cylinder, cylinder head, original camshaft and filter.
• Curve 1: Specific for 125cc with Malossi exhaust with db killer, Malossi cylinder, cylinder head, original camshaft and filter.
• Curve 2: Specific for 125cc with original exhaust, Malossi cylinder, cylinder head, original camshaft and filter.
• Curve 3: Specific for 125cc with Malossi exhaust with db killer, Malossi cylinder, cylinder head, original camshaft and filter.

Its architecture with capacitive ignition input and IP65 protection ensures that the electronics withstand vibrations and weather conditions without signal degradation. It is the essential brain for any preparation based on Piaggio iGet to work in a coordinated and reliable way.

Technical features

• Fuel mixture adjustment: ± 14% at low, medium, and high revs.
• Rev limiter: Increased up to 10,500 RPM.
• Operating temperature range: -30 degrees Celsius to +80 degrees Celsius.
• Operating voltage: 7V to 16V.
• Average consumption: Less than 200mA.
• Protection rating: IP65 (water and dust resistant).
• Maps: 4 curves selectable according to exhaust and cylinder configuration.
• Communication: Interface for K and CAN lines.

Compatible models

PIAGGIO

• LIBERTY iGet 125 ie 4-Stroke euro 5+ >2025 (MD43M)
• LIBERTY S iGet 125 ie 4-Stroke euro 5+ >2025 (MD43M)

VESPA

• VESPA Primavera Batik iGet 125 ie 4-Stroke euro 5+ >2025 (MD13M)
• VESPA Primavera Batik iGet 150 ie 4-Stroke euro 5+ >2025
• VESPA Primavera iGet 125 ie 4-Stroke euro 5+ >2024 (MD13M)
• VESPA Primavera Officina 8 125 ie 4-Stroke euro 5+ >2025 (MD13M)
• VESPA Primavera Officina 8 150 ie 4-Stroke euro 5+ >2025
• VESPA Primavera RED iGet 125 ie 4-Stroke euro 5+ >2025 (MD13M)
• VESPA Primavera RED iGet 150 ie 4-Stroke euro 5+ >2025
• VESPA Primavera S iGet 125 ie 4-Stroke euro 5+ >2025 (MD13M)
• VESPA Primavera S iGet 150 ie 4-Stroke euro 5+ >2025
• VESPA Primavera Tech iGet 125 ie 4-Stroke euro 5+ >2025 (MD13M)
• VESPA Primavera Tech iGet 150 ie 4-Stroke euro 5+ >2025
• VESPA Sprint S iGet 125 ie 4-Stroke euro 5+ >2024
• VESPA Sprint S iGet 150 ie 4-Stroke euro 5+ >2024

Attention! This control unit must be installed EXCLUSIVELY in combination with the Malossi cylinder with reference 3115695.